PolyTech Boot safety boots
Light, flexible, thermally insulated polyurethane boots, made for whole days on wet ground: in the barn, on the farm, in the greenhouse, in food processing or on building sites. Crotag is the authorised PolyTech Boot agent in Romania.
Authorised PolyTech Boot agent
PolyTech BB, black
Available sizes: 37–45
Where to wear them
Agriculture and livestock
Wet ground all day in the barn, stable or greenhouse. The boots are fully waterproof.
Suitable classes: O4, O5
Food processing
Places where hygiene matters: the boots are easy to clean and the sole doesn't slip.
Suitable classes: O4, O5
Construction and industry
Falling objects and nails on the ground call for a steel toe cap and an anti-puncture midsole.
Suitable classes: S4, S5
Chemicals and petrochemicals
Floors with oil and fuel: the sole is fuel resistant (FO) and slip resistant (SR).
Suitable classes: S4, S5
Shared by every model
| Upper | Low-density polyurethane (PU) |
|---|---|
| Sole | High-density polyurethane, fuel resistant (FO) |
| Thermal insulation | No cracking down to -40 °C; heat (HI) and cold (CI) insulation, as stated by the manufacturer |
| Antistatic and slip resistant | Antistatic (A), slip resistance (SR) |
| Insole | Orthopaedic, antibacterial and removable (Fuspet) |
| Sizes | 37–45 |
What the protection classes mean
O4 and O5 are work boots (EN ISO 20347), for water, wet ground and cold where nothing can strike the foot.
S4 has a steel toe cap rated for a 200 J impact (EN ISO 20345), for falling objects and crushing. S5 also has a steel anti-puncture midsole, which stops nails and sharp objects.
Every model is antistatic (A), with a fuel-resistant sole (FO), heat and cold insulation (HI, CI) and slip resistance (SR).
- Maximum protection
- Comfortable to wear
- Waterproof construction
- Slip-resistant sole
- Durable material
- Long-lasting performance
PolyTech Boot quality
Experience since 1985
PolyTech has worked in occupational safety since 1985. Since 2022 it has made polyurethane boots in its own factory in Manisa, Türkiye.
DESMA direct injection
The boots are moulded on a German DESMA direct injection line, from dual-density polyurethane: light, flexible, insulating and tough.
Checked at every stage
Raw materials are checked on arrival, production is checked for mould, size and finish, and every product gets a final check before shipping.
Independent certification
EU type-examination certificates (Module B) issued by SGS under EN ISO 20345:2022 and EN ISO 20347:2022. The management systems are certified to ISO 9001, ISO 14001 and ISO 45001.



